Application with a self-installation frame
Clean your screen
It is very important to have a perfectly cleaned screen area. Remove smudges with a wet cloth, then wipe with a dry cloth until the surface is completely clean and dry.
Do not touch the screen after cleaning.
Application with a self-installation frame
If you have a self-installation frame in the package, put it on your smartphone.
Step 1 (PULL) Pull the installation foil from under the installation frame.
Step 2 (PRESS AND SLIDE) Press the fingerprint icon and then swipe down. The glass protector adheres to the display.
Step 3 Remove the installation frame from the smartphone.
Place the installation frame on the smartphone without the protective cover.
Fixing errors A
If dust particles remain under the protective glass, the glass can be peeled off very slowly, the dust can be removed with dust sticker again. When screen is clean you can reglue screen protector.
Lift the glass protector slowly and with a slight incline. The glass may break if peeled off quickly. Be careful when correcting 3D glass protector defects.
Fixing errors B
If air bubbles remain under the protective glass, either in the middle or in the edge, the protective glass can be slowly lifted, then release the bubbles and push towards the edges.
Lift up the glass protector slowly and with a slight incline. The glass may break if peeled off quickly. Be careful when correcting 3D glass protector defects.